Sale & Discount Snowboards NZ

Directional Extra Camber – A directional shape with a little more camber for your punch

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Cleve Edge - Ride Cleave Edge uses almost 50% more steel, so it is tougher and can handle more of a beating on rails and jibs. More edge means you can also detune it more.

Carbon Slim Walls® – A 3D composite structure positioned over Carbon-backed Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

TOPSHEET

Topless Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

SPECS

Directional Extra Camber – A directional shape with a little more camber for your punch

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Cleve Edge - Ride Cleave Edge uses almost 50% more steel, so it is tougher and can handle more of a beating on rails and jibs. More edge means you can also detune it more.

Carbon Slim Walls® – A 3D composite structure positioned over Carbon-backed Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

TOPSHEET

Topless Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

SPECS

Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

FLEX

Flex Rating – 8 (1 Playful - 10 Precise)

CORE

A1 Core – Lightweight, snappy, and durable, the all-new A1 Core is made from three renewable species of timber - bamboo, aspen, and paulownia. Aspen-dominant to highlight the snap and response of this wood, it's combined with bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. They've also placed lightweight paulownia in the tip and tail help to reduce swing weight.

LAMINATES

ICG™ 20 Triaxial Carbon Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

BASE

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market from Crown, the Wax-Infused Sintered 4001 Base hold wax longer than other sintered bases for a smoother glide, longer.

3D Nose Contour – 3D contour (spoon) that is gradually blended from the running sur-face deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

TOPSHEET

recess3d Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BINDING COMPATIBILITY