Sale & Discount Snowboards NZ

Regular or goofy - it’s still a true twin. Just flip it around.

Sintered True - Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

SPECS:

Directional Extra Camber – A directional shape with a little more camber for your punch

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Cleve Edge - Ride Cleave Edge uses almost 50% more steel, so it is tougher and can handle more of a beating on rails and jibs. More edge means you can also detune it more.

Carbon Slim Walls® – A 3D composite structure positioned over Carbon-backed Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

TOPSHEET

Topless Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

SPECS

Directional Caber - The most responsive camber profile in the line camber running from in front of the front foot to the tail of the board with a slight early rise in the nose. This fives the rider the most precision and control possible in any terrain while still floating effortlessly in the deep stuff.

SHAPE

Tapered Directional

CORE

ICG 20 Biax Glass with Carbon – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

SIDEWALLS

Hybritech™ – Hybritech™ is the most efficient way to make a snowboard without sacrificing one ounce of performance. Featuring sidewalls along the running surface that flow into the nose and tail, providing low swing-weight while extending the wood core all the way to the tip of the board for optimized turning initiation and durability.

BASE

P2 Superlight Core™ – The P2 SUPERLIGHT CORE™ is an extremely lightweight core engineered to withstand high impact and deliver maximum pop. Comprised of an even mix of Poplar and Paulownia wood, the P2 is FSC® Certified and ready to dominate in any environment.

Technora™ + Flax Boosters – With an excellent tensile strength and fatigue resistance, Technora™ is an aramid fiber that functions as a shock absorber and energy source when integrated into a snowboard construction layup. CAPiTA has interwoven Technora™ with an extremely lightweight and all-natural Flax fiber to invigorate every construction combination with maximum turning and ollie power.

Full ABS1000 Sidewalls

360 Degree HRC48 Steel Edges

Directional Extra Camber – A directional shape with a little more camber for your punch

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Cleve Edge - Ride Cleave Edge uses almost 50% more steel, so it is tougher and can handle more of a beating on rails and jibs. More edge means you can also detune it more.

Carbon Slim Walls® – A 3D composite structure positioned over Carbon-backed Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

TOPSHEET

Topless Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

SPECS

Directional Twin Standard Camber – A directional twin shape with a hybrid standard traditional camber underfoot.

Slightly longer in the nose.

Medium Response

Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Pre-Cured Glass Fiberglass – USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.

Slimewalls® – RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

Carbon Slimewalls® – This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This exclusive tech enhances the charging rider’s experience as we have moved the carbon pop construction to the outside edge for better stability and enhanced response.

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

2 x 4 Inserts

Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

FLEX

Flex Rating – 8 (1 Playful - 10 Precise)

CORE

A1 Core – Lightweight, snappy, and durable, the all-new A1 Core is made from three renewable species of timber - bamboo, aspen, and paulownia. Aspen-dominant to highlight the snap and response of this wood, it's combined with bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. They've also placed lightweight paulownia in the tip and tail help to reduce swing weight.

LAMINATES

ICG™ 20 Triaxial Carbon Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

BASE

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market from Crown, the Wax-Infused Sintered 4001 Base hold wax longer than other sintered bases for a smoother glide, longer.

3D Nose Contour – 3D contour (spoon) that is gradually blended from the running sur-face deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

TOPSHEET

recess3d Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BINDING COMPATIBILITY

CORE

Triaxial Glass – A glass laminate with diagonal layers that adds torsional stiffness for increased stability and improved edge hold. The fibers three layers of fibers are woven at 45° , 45° , and 0° . This makes for a more responsive ride longitudinally and torsionally.

Spectral Braid™ – K2’s Patented Spectral Braid is a first-of-its-kind variable angle reinforcement that allows for precision-tuned torsion and flex by altering the fiber orientation along the length of the snowboards. This makes snowboards feel lively, energetic, and remarkably composed.

SpaceGlass™ Tip – An American-made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at a reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

Carbon Power Fork™ – Pre-cambered Carbon Power Fork™ additives are strategically shaped to offer greater response and energy return by increasing the width toward the tail - allowing for more material to be engaged, and more energy to be created the harder the tail is flexed. Adds snap to ollies, increases edge pressure, and gives energy in and out of turns.

recess3d – By reducing the number of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BASE

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market from Crown, the Wax-Infused Sintered 4001 Base hold wax longer than other sintered bases for a smoother glide, longer.

Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

FLEX

Flex Rating – 8 (1 Playful - 10 Precise)

CORE

A1 Core – Lightweight, snappy, and durable, the all-new A1 Core is made from three renewable species of timber - bamboo, aspen, and paulownia. Aspen-dominant to highlight the snap and response of this wood, it's combined with bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. They've also placed lightweight paulownia in the tip and tail help to reduce swing weight.

LAMINATES

ICG™ 20 Triaxial Carbon Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

BASE

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market from Crown, the Wax-Infused Sintered 4001 Base hold wax longer than other sintered bases for a smoother glide, longer.

3D Nose Contour – 3D contour (spoon) that is gradually blended from the running sur-face deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

TOPSHEET

recess3d Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BINDING COMPATIBILITY

MidBite blends the response of a narrow waist width with the stability of wider nose and tail.

The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to- edge response. Meanwhile, from your binding out to the end of the sidecut we maintain a board width that is a stable platform for popping, spinning, and landing.

CORE

Full Poplar Core - YES snowboards baseline core for tip to tail wood-core snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.

BASE

Sintered True Base - Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

FLEX

Flex Rating – 8 (1 Playful - 10 Precise)

CORE

A1 Core – Lightweight, snappy, and durable, the all-new A1 Core is made from three renewable species of timber - bamboo, aspen, and paulownia. Aspen-dominant to highlight the snap and response of this wood, it's combined with bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. They've also placed lightweight paulownia in the tip and tail help to reduce swing weight.

LAMINATES

ICG™ 20 Triaxial Carbon Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

BASE

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market from Crown, the Wax-Infused Sintered 4001 Base hold wax longer than other sintered bases for a smoother glide, longer.

3D Nose Contour – 3D contour (spoon) that is gradually blended from the running sur-face deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

TOPSHEET

recess3d Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BINDING COMPATIBILITY

CORE

Triaxial Glass – A glass laminate with diagonal layers that adds torsional stiffness for increased stability and improved edge hold. The fibers three layers of fibers are woven at 45° , 45° , and 0° . This makes for a more responsive ride longitudinally and torsionally.

Spectral Braid™ – K2’s Patented Spectral Braid is a first-of-its-kind variable angle reinforcement that allows for precision-tuned torsion and flex by altering the fiber orientation along the length of the snowboards. This makes snowboards feel lively, energetic, and remarkably composed.

SpaceGlass™ Tip – An American-made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at a reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

Carbon Power Fork™ – Pre-cambered Carbon Power Fork™ additives are strategically shaped to offer greater response and energy return by increasing the width toward the tail - allowing for more material to be engaged, and more energy to be created the harder the tail is flexed. Adds snap to ollies, increases edge pressure, and gives energy in and out of turns.

recess3d – By reducing the number of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

BASE

Resort V1 Profile. RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next-generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

TRUE TWIN SHAPE

Constructed the same from nose to tail, this board will ride switch and regular equally well for controlled jumps, landings, turns, and spins.

SIDECUT

Blended Radial Sidecut. BLENDED RADIAL sidecuts feature a single radius arc through the midsection of the board combined with a custom-designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board it's performance.

3D Thermopolymer Supercore - This extremely lightweight, super-combo core of premium Poplar, Paulownia, and Beech with recycled thermopolymer (PET) inlaid channels offer maximum durability, energy and pop. This is one of the most advanced cores Capita makes and it is the perfect composition for the top-end Super DOA.

Super Carbon - 2 x 50mm super wide carbon strips are laid along the length of the board into the tip and tail. This extra wide carbon adds twice the power and response of alternative carbon additives.

HolySheet Tri/Tri Fibreglass + Magic Bean Resin - Triax/Triax HolySheet glass has a higher glass to weight ratio than normal fibreglass, giving you more stiffness with lower weight than a traditional layup. This is impregnated with a high performance, environmentally responsible, plant based resin that provides a powerful and dynamic ride that's better for the planet.

Fortress Aramid Bound Sidewalls - Sidewalls are bonded by a Kevlar S wrap from the top of the sidewall to the underside of the core. This lightweight technology binds the sidewall to the core like no other.

Hyperdrive Adv XT Die Cut Base - This custom formulated base uses exceptional anti-friction properties due to high molecular mass and specialised processing aids to make a sintered material that is beyond fast and is one of the fastest, meanest and best bases available.

TOPSHEET

Megalite Skin Topsheet - Super thin and mega durable matte lamina topsheet that offers 60% weight reduction over regular Capita top sheets.

Moonshot Omni-Tune - Capita has taken it a step further and given this base a stone grind structure which helps it glide over snow with minimal resistance and is optimized for regular and switch riding.

Full ABS1000 Sidewalls