Winter 2025 Pre-Order

Warpig Telemark SKIS!

The SPLITPIG is the WARPIG shape that breaks in half so you can walk up mountains and thrash every feature on the way down. Its got the flex of a WARPIG with a Carbon Race Base and a little bit of camber for the climb. Featuring a brushed nylon topsheet to reduce weight while shedding snow. The Split Performance Core features a Slimewall ® center sidewall for maximum vibration damping. The Channel Binding Mounting System allows for more stance options and a much easier setup than standard split inserts, which limit stance options. The SPLITPIG comes with Pomoca Climb 2.0 skins custom fit to the shape and a canted binding mounting puck that works with some split bindings on the market. Forget custom-cutting your skins and well cut to the chase: The SPLITPIG will allow you to access more off-piste locations in the mountains.

Rider Type:  Splitboarding

Shape: Directional

Flex: Medium

Rocker: Rocker nose / Camber underfoot

Ability Level:  Advanced / Expert

FEATURES:

FITMENT NOTE:

The SPLITPIG requires the use of a splitboard binding or a kit that converts your standard binding into a splitboard binding. RIDE does not currently make a splitboard binding, but Voll © makes a kit that will allow you to use your RIDE binding on this splitboard. The SPLITPIG comes with a canted puck that will work with a number of splitboard bindings that normally require you to purchase the puck separately (Spark, Burton, Volle, K2). Other split bindings (Karakorum and Union) will not use the included puck (check with the manufacturer) but should come with all the equipment required to mount to the SPLITPIG.

The  Defenders of Awesome series has a big reputation and these boards back it up. As winners of the most coveted design award in snowboarding for an unprecedented seven years in a row, this model became our #1 selling snowboard and one of the most sought-after snowboards in the world.

The D.O.A.  features a next-generation hybrid camber design that delivers the pop and response of a cambered board with the predictability of reverse camber and is now available in an extended range of wide sizes. The D.O.A. series stands proud as the ultimate go-anywhere, do-anything freestyle deck.

RIDER TYPE: All Mountain / Freestyle

Shape: True Twin

Flex: 5.5/10 - Medium

Ability Level: Intermediate / Advanced

WIDE for boot sizes 11US and up

CAMBER

RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

SPECS:

The  Defenders of Awesome series has a big reputation and these boards back it up. As winners of the most coveted design award in snowboarding for an unprecedented seven years in a row, this model became our #1 selling snowboard and one of the most sought-after snowboards in the world.

The D.O.A.  features a next-generation hybrid camber design that delivers the pop and response of a cambered board with the predictability of reverse camber and is now available in an extended range of wide sizes. The D.O.A. series stands proud as the ultimate go-anywhere, do-anything freestyle deck.

RIDER TYPE: All Mountain / Freestyle

Shape: True Twin

Flex: 5.5/10 - Medium

Ability Level: Intermediate / Advanced

CAMBER

RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

SPECS:

If your ideal snowboard treats the entire mountain like a terrain park, feelsat home sliding rails and boxes, and ventures into the streets from time to time, look no further than the all-new K2 World Peace. 

Twin in both shape and flex, the World Peace features a smooth flexing single-species core profile that we engineered to lock into presses and butters with ease.  Its core is constructed of 100% Aspen, a lightweight, renewable timber built to absorb shocks and take a beating. We wrap the core in a biax fiberglass--with fibers intersecting at a 90º angle--giving riders the ability to manipulate their tricks and a relaxed feel between features.

Lastly, we gave the World Peace a hard, fast, sintered 4000 base - a material that is genuinely as tough as nails to stand up to the abuse that freestyle snowboarding dishes out. 

Graphically, we worked with K2 Snowboarding Staff Photographer Marc O’Malley to help bring the World Peace some new energy for 2024. A bright, poppy base makes it so that your tricks catch people's attention in the park, and a clean top sheet is the perfect canvas for stickers and maybe even a little bit of illustration yourself. 

Rider Type:  Freestyle / Park

Shape: Twin

Flex: 5/10

Rocker: Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Combination Camber Profile – The best of both worlds. By blending both traditional Camber and Rocker profiles, Combination Camber gives you all the benefits of both: the pop and precision of camber, and the float and predictability of rocker.

CORE

Aspen Core – A single species of wood ensures consistency - giving riders the advantage of a proven flex, durability, and snap.

Biaxial Glass – Smooth all-purpose performance with a no-frills design. Fibers are woven together at 0° and 90°, creating a more forgiving flex pattern.

BASE

Sintered 4000 Base – The sintered 4000 base absorbs wax deep into the material for relentless glide and unrivaled durability.

BINDING COMPATIBILITY

2X4 Inserts

Like any good exploratory mission, don’t forget to take your Passport with you -- the key to accessing uncharted terrain. Built for the intermediate-to-expert level rider and shaped and sized to be unisex, the Passport is directional in every way but remains switch and fakie friendly.

Slightly-wider-than-average waist width is met with 8mm of taper to ensure easy turning and float in deep snow. It’s complemented by an elongated rocker profile from the front insert pack, throughout the tip. A tighter sidecut radius in the tip and tail allows you to engage turns easily, while a longer radius between the feet makes the turn smooth and predictable progression. We’ve added a new blend of ICG 10™ Triax fiberglass to the Passport, adding tip-to-tail snap with precise edge performance.

This glass layup wraps our lightweight A1 core - which features three species of sustainably harvested timber, and all of it sits atop a fast and durable Sintered 4000 base.

Rider Type:  All Mountain / Freeride

Shape: Directional but switch friendly

Flex: 6 /10

Rocker: Rocker Nose /  Camber Under Feet  / Small Rocker at tail

Ability Level:  Intermediate / Advanced

CAMBER

Directional Combination Camber Profile – The best of both worlds. By blending both traditional Camber and Rocker profiles, Combination Camber gives you all the benefits of both: the pop and precision of camber, and the float and predictability of rocker.

SHAPE

The Passport has a directional shape so it wants to ride forwards. It can handle a bit of switch for sure, but riding your natural stance is where it will shine. 

CORE

Backed by years of rigorous testing, Hybritech™ is the lightest weight, most durable snowboard construction on the market. Removing all excess sidewall material in the tip and tail and adding a 3D capped edge to increase the bond strength of the fiberglass and decrease the swing weight of the board is what makes Hybritech so revolutionary. Our boards will spin faster, maneuver easier, and last longer than any other boards on the market.

BASE

Sintered 4000 Base – The sintered 4000 base absorbs wax deep into the material for relentless glide and unrivaled durability.

BINDING COMPATIBILITY

2X4 Inserts

Have your mind blown by the K2 Excavator. Designed for the new age carver that has to slash every lip insight on the way to the POW stashes. This board is built for fun but also knows when to be serious. The wider profile of the Excavator allows riders to size down 5cm from their usual snowboard size and allows you to get all of the performance out of a longer board without the extra swing weight. This extra width and 20mm of taper benefits riders with wider feet, reducing any “booting out” on those deep corduroy carves and long traverses but don't be afraid of the width, both for male and female riders. Riding is believing!

Rider Type:  All Mountain / Freeride

Shape: Directional

Flex: Stiff (7/10) 

Rocker: Rocker / Camber / Rocker

CAMBER

When K2 introduced the PASSPORT - the feedback from their Team riders, Retail partners, and the conversations we’ve had in the liftlines (Whattup Alpental and Brighton Locals?!) - we knew we had a winner.

The waist width, sidecut, camber profile, and taper were spot on - but some riders we spoke to were looking for something a bit more robust for higher speeds and steeper terrain, and we said…”let’s make some prototypes.” We did, they were okay, so we made some more, and some more, and they f#cking ruled.

The result of proto round #3… the COMMONWEALTH - using the same shape and geometry that has made the Passport successful, with a more “beefed up” feature set for riders looking for something a bit more demanding. Our A1 Core gets wrapped in a heavier weight tri-axial fiberglass, which is then layered in our patented Spectral Braid - a piece of technology that we developed that allows you to fine tune the tip-to-tail flex of the snowboard independently from the torsional flex - it rules, we promise. We topped it all off with a wax infused sintered 4001 base to make sure you’re not getting stuck in the flats.

We believe that everyone should be able to experience the mountains - so the Commonwealth was designed and tested for all-genders. Starting at a 146 and sizing all of the way up to 166W-, this snowboard’s construction, waist width, and flex profile is scaled to meet the needs of the riders for each respective size.

Rider Type: All Mountain / Freeride

Shape: Directional

Flex: 7/10 

Rocker: Traditional Camber

Ability Level:  Intermediate / Advanced

Rocker Type

Designed to ride the entire resort and score an A+ in the turning category, the K2 Almanac snowboard is writing the newest chapter in Volume Shift™ snowboards. Purpose-engineered to be a daily driver, this snowboard takes inspiration from models like the Party Platter and Excavator, and charts its own course.

When choosing the Almanac, you’ll want to size down 5cm, due to it’s wider than average outline (read: Volume Shift™) - so if you normally ride a 158cm snowboard, you’ll want to get your hands on the 153cm length for lapping your favorite run at the resort.

When it comes to tech, the Almanac does not skimp. Camber under-foot with raised contact points in the tip and tail help make this snowboard comfortable riding the entire resort - enough snap for the feeling of energy in and out of the turn, and a fluid feel when transitioning from edge to edge. From the bottom up, we’ve started with a hard and fast sintered 4000 base, a snappy core consisting of bamboo, aspen, and poplar woods, a bi-axial fiberglass weave, and our tip-to-tail carbon backbone snapping Ollies over slow signs. The Almanac also features an additional set of inserts for the front and back foot, so you can set your bindings back and enjoy a little extra float on the deep days.

Rider Type:  All Mountain / Freestyle

Shape: Directional

Flex: 5/10

Rocker: Rocker Nose / Camber / Shorter Rocker Tail

Ability Level:  Intermediate / Advanced 

CAMBER

If your ideal snowboard treats the entire mountain like a terrain park, feelsat home sliding rails and boxes, and ventures into the streets from time to time, look no further than the all-new K2 World Peace. 

Twin in both shape and flex, the World Peace features a smooth flexing single-species core profile that we engineered to lock into presses and butters with ease.  Its core is constructed of 100% Aspen, a lightweight, renewable timber built to absorb shocks and take a beating. We wrap the core in a biax fiberglass--with fibers intersecting at a 90º angle--giving riders the ability to manipulate their tricks and a relaxed feel between features.

Lastly, we gave the World Peace a hard, fast, sintered 4000 base - a material that is genuinely as tough as nails to stand up to the abuse that freestyle snowboarding dishes out. 

Graphically, we worked with K2 Snowboarding Staff Photographer Marc O’Malley to help bring the World Peace some new energy for 2024. A bright, poppy base makes it so that your tricks catch people's attention in the park, and a clean top sheet is the perfect canvas for stickers and maybe even a little bit of illustration yourself. 

Rider Type:  Freestyle / Park

Shape: Twin

Flex: 5/10

Rocker: Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Combination Camber Profile – The best of both worlds. By blending both traditional Camber and Rocker profiles, Combination Camber gives you all the benefits of both: the pop and precision of camber, and the float and predictability of rocker.

CORE

Aspen Core – A single species of wood ensures consistency - giving riders the advantage of a proven flex, durability, and snap.

Biaxial Glass – Smooth all-purpose performance with a no-frills design. Fibers are woven together at 0° and 90°, creating a more forgiving flex pattern.

BASE

Sintered 4000 Base – The sintered 4000 base absorbs wax deep into the material for relentless glide and unrivaled durability.

BINDING COMPATIBILITY

2X4 Inserts

When K2 introduced the PASSPORT - the feedback from their Team riders, Retail partners, and the conversations we’ve had in the liftlines (Whattup Alpental and Brighton Locals?!) - we knew we had a winner.

The waist width, sidecut, camber profile, and taper were spot on - but some riders we spoke to were looking for something a bit more robust for higher speeds and steeper terrain, and we said…”let’s make some prototypes.” We did, they were okay, so we made some more, and some more, and they f#cking ruled.

The result of proto round #3… the COMMONWEALTH - using the same shape and geometry that has made the Passport successful, with a more “beefed up” feature set for riders looking for something a bit more demanding. Our A1 Core gets wrapped in a heavier weight tri-axial fiberglass, which is then layered in our patented Spectral Braid - a piece of technology that we developed that allows you to fine tune the tip-to-tail flex of the snowboard independently from the torsional flex - it rules, we promise. We topped it all off with a wax infused sintered 4001 base to make sure you’re not getting stuck in the flats.

We believe that everyone should be able to experience the mountains - so the Commonwealth was designed and tested for all-genders. Starting at a 146 and sizing all of the way up to 166W-, this snowboard’s construction, waist width, and flex profile is scaled to meet the needs of the riders for each respective size.

Rider Type: All Mountain / Freeride

Shape: Directional

Flex: 7/10 

Rocker: Traditional Camber

Ability Level:  Intermediate / Advanced

Rocker Type

The North Star in the K2 Snowboarding snowboard offering, and the marquee of the Landscape Collection, the Alchemist is a hard-charging, directional freeride board for a skilled rider. Targeted to please the advanced to expert level snowboarder, the Alchemist is packed with functional technology. This snowboard features two unique technologies from the K2 camp; the SpaceGlass™ tip insert and the patented Spectral Braid. SpaceGlass™ is a pre-cured fiberglass insert that helps reduce weight, reduce chatter, and increase edge pressure. Spectral Braid is a technology that allows us to adjust tip-to-tail stiffness independently from the torsional stiffness. This lets us make a torsionally stiffer snowboard in the tip and tail to promote edge hold while keeping it more relaxed between the feet to allow for easy turn initiation.

Rider Type: All Mountain / Freeride

Shape: Directional

Flex: 9/10 - Super Responsive

Rocker: Rocker Nose /  Camber Under Feet  

Ability Level:  Advanced / Expert

CAMBER

The WARPIG sees the entire mountain as an opportunity to thrash at full speed. Slim Wall is the evolution of Ride’s Roll-in Construction to its most extreme limit. By creating a fully 3-D composite structure over our proprietary Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight constructions, and even better damping. The WARPIG shape has won multiple snowboard tests for both all-mountain and freestyle categories, which is a rare feat in modern snowboarding. The versatility of the WARPIG is unmatched. This board will allow you to lay down carves, hit huge jumps and ride big mountain lines. A Tapered Bi-Radial Sidecut maximizes grip and allows the WARPIG to transition from edge-to-edge like a traditional narrow snowboard while getting the float and stability of a wider modern deck. A Performance™ Core combines Aspen, Bamboo, and Paulownia wood to provide the perfect balance of strong and light. The WARPIG is a battle-tested all-mountain board for intermediate to advanced riders who aspire to crack the skull of winter and feast on its delicious pink insides.

Rider Type:  All Mountain

Shape:  Directional

Flex:  Medium

Rocker:  Rocker / Flat / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Half the size but twice the technology of other kids boards on the market

For little tykes that wanna go big, the Zero Jr. is a Twin Hybrid Rocker board that aims to reduce edge catching, make it easier to initiate turns so they can get the hang of the edge-to-edge transition of riding groomers and soften the vibrations that can cause kids to fall. Packed with similar construction as our adult-size Zero model, the Zero Jr. is the perfect way to introduce your little one to riding or let them take it to the next level if they have their feet solidly under them after a few winters on the hill.

Rider Type:  All Mountain / Freestyle

Shape:  Twin

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  All Levels - Youth

TWIN HYBRID CAMBER:

A true twin-shape hybrid profile that has more camber than rocker.

LINEAR QUADRATIC SIDECUT:

A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

SINTERED BASE:

High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

PERFORMANCE™ CORE:

High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

SLIM WALLS:

RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit. By creating a fully 3-D composite structure over Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.

CARBON ARRAY LAMINATES:

This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

BIAXIAL GLASS FIBERGLASS:

90° and 0° angles, fun and forgiving.

IMPACT PLATES LAMINATES:

Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

STANDARD TOP SHEET:

Durable Urethane topsheet material with graphics only RIDE can bring you.

CLEAVE EDGE™ STEEL:

Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be detuned to larger radii.

The Zero will enhance your park and freestyle riding in numerous ways this winter

The Zero is a unisex snowboard that knows no boundaries. It can be ridden by anyone, anywhere, at any time, thanks to Twin Hybrid Rocker and Asymmetrical Quadratic Sidecut. The timeless graphic is a throwback to snowboardings days of classic, simple and unique look but its packed with technology to mirror todays landscape of innovation, with features like Flat Kick Tips on the nose and tail and a Performance Core to give you extra stability in the park and the streets. A favorite of team riders Jill Perkins and Reid Smith, the Zero is the next big thing in the RIDE line.

Rider Type:  All-Mountain / Freestyle

Shape:  Twin

Flex: Medium

Rocker: Hybrid Rocker

Ability Level: Intermediate / Advanced

CAMBER

Twin Standard Camber – A true twin shape hybrid profile that has more camber than rocker.

FLEX

Medium Response

SHAPE

Asymmetrical Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

Flat Kick Tips

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 3™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Bi-axial Glass – 90° and 0° angles, fun and forgiving.

SIDEWALLS

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

The Zero will enhance your park and freestyle riding in numerous ways this winter

The Zero is a unisex snowboard that knows no boundaries. It can be ridden by anyone, anywhere, at any time, thanks to Twin Hybrid Rocker and Asymmetrical Quadratic Sidecut. The timeless graphic is a throwback to snowboardings days of classic, simple and unique look but its packed with technology to mirror todays landscape of innovation, with features like Flat Kick Tips on the nose and tail and a Performance Core to give you extra stability in the park and the streets. A favorite of team riders Jill Perkins and Reid Smith, the Zero is the next big thing in the RIDE line.

Rider Type:  All-Mountain / Freestyle

Shape:  Twin

Flex: Medium

Rocker: Hybrid Rocker

Ability Level: Intermediate / Advanced

CAMBER

Twin Standard Camber – A true twin shape hybrid profile that has more camber than rocker.

FLEX

Medium Response

SHAPE

Asymmetrical Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

Flat Kick Tips

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 3™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Bi-axial Glass – 90° and 0° angles, fun and forgiving.

SIDEWALLS

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

This chunder buster loves to go fast, blast, and dodge through the tightest trees. It's a quiver-of-one built with attention to detail found only in the Burton Family Tree line.

Rider Type:  All Mountain / Freeride  / Powder

Shape:  Directional

Flex:  6/10 - Medium 

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced 

CAMBER

This chunder buster loves to go fast, blast, and dodge through the tightest trees. It's a quiver-of-one built with attention to detail found only in the Burton Family Tree line.

Rider Type:  All Mountain / Freeride  / Powder

Shape:  Directional

Flex:  6/10 - Medium 

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced 

CAMBER

The 2026 Ride Twinpig takes everything that made the Warpig a fan favorite and reimagines it in a twin shape. With the same extra width, it’s built to carve deep on groomers while offering the playful pop and responsiveness you need for park riding. Featuring the Twin Standard Camber, it delivers the renowned park performance, powder float, and groomer domination of the Warpig, but with the added benefit of a switch-friendly shape for smoother transitions and enhanced carve control. Whether you’re shredding the park or floating through powder, the Twinpig brings all the versatility and performance you could ask for.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Hybrid Rocker – A true twin shape hybrid profile that has more rocker than camber.

Quadratic Sidecut:

CLEAVE EDGE™ STEEL:

Hybrid Glass:

Sintered Base:

Performance™ Core:

Slim Walls:

Impact Plates Laminates:

Standard Top Sheet:

The 2026 Ride Twinpig takes everything that made the Warpig a fan favorite and reimagines it in a twin shape. With the same extra width, it’s built to carve deep on groomers while offering the playful pop and responsiveness you need for park riding. Featuring the Twin Standard Camber, it delivers the renowned park performance, powder float, and groomer domination of the Warpig, but with the added benefit of a switch-friendly shape for smoother transitions and enhanced carve control. Whether you’re shredding the park or floating through powder, the Twinpig brings all the versatility and performance you could ask for.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Hybrid Rocker – A true twin shape hybrid profile that has more rocker than camber.

Quadratic Sidecut:

CLEAVE EDGE™ STEEL:

Hybrid Glass:

Sintered Base:

Performance™ Core:

Slim Walls:

Impact Plates Laminates:

Standard Top Sheet:

Live life high on the hog with this high-end snowboard that tackles every type of terrain

The SUPERPIG infuses high-end tech into our best-selling WARPIG shape for an elite all-mountain deck. If you find yourself seeking out something big and bad, avoid the other pigs and take shelter with the SUPERPIG, because this board is built like a brick shithouse. The SUPERPIG is the same shape as the WARPIG, just with a lot more tech and a little bit of camber. Size the SUPERPIG down 6 to 10cms from your standard size because of its innovative shape. The SUPERPIG rides like a very angry WARPIG. This board is made for the demanding rider that wants the aggressive thrash style of the WARPIG with camber and a little more stiffness. Don't let the shape fool you this board will go anywhere and do anything. Of course, it will still ride powder with its short, wide shape, but you'll be really impressed at how fast the SUPERPIG goes from edge to edge on hardpack and the pop the camber provides. A Tapered Bi-Radial Sidecut maximizes grip and maintains speed in all conditions. Carbon Infused Glass provides extra pop and new Carbon Slim Walls reduce weight, increase damping, and increases energy transfer to enhance response and stability. Carbon Array 5 provides extra pop without adding stiffness while the low friction Race Base is made from a carbon-infused sintered base material to ensure a fast ride.

Rider Type:  All-Mountain / Freeride / Powder

Shape:  Directional

Flex:  Stiff

Rocker:  Rocker / Camber / Rocker

Ability Level:  Advanced / Expert

CAMBER

WARPIG roots with a modern touch, the PSYCHOCANDY is an all-new shape designed to take your riding to new heights.

The PSYCHOCANDY has additional sizes this year to accommodate all riders. The shape is based on the innovative WARPIG, so the board is designed to be ridden 3 to 6 cms shorter than your standard board and approaches the mountain with the same ideology attitude that the WARPIG is known for. A Tapered Bi-Radial Sidecut maximizes grip and allows the PSYCHOCANDY to maintain speed in all conditions. Carbon Slimewalls ® enhances response and stability. The PSYCHOCANDY is a directional all-mountain board designed to ride like a WARPIG so you can tackle any and all-terrain the mountain has to offer, be it park, pipe, pow or slush.

Shape: Tapered Directional Rocker

Rider Type:  All Mountain

Ability Level: Intermediate / Advanced

Flex: Medium

Rocker: Rocker / Flat / Rocker

CAMBER

The 2026 Ride Moderator is the ultimate all-mountain snowboard, built to tackle any condition with ease. Featuring a medium flex and a Tapered Directional Extra Camber profile, it offers a smooth, responsive ride with impressive pop and excellent flotation in deep powder. The Tapered Linear Quadratic Sidecut ensures effortless turns and exceptional edge hold, while the Slim Wall construction enhances flexibility and shock absorption for a smooth, comfortable ride across the mountain.

Packed with high-performance features like the Performance Light Core, Carbon Array 3, and a Sintered Stone Ground Base, the Moderator is designed for speed and precision. Plus, with eco-friendly bio-resin, this board delivers top-tier performance while reducing environmental impact. Whether you're carving up groomers or floating through fresh powder, the 2026 Ride Moderator is ready to take on whatever the mountain throws your way.

Rider Type: All Mountain / Freeride

Ability: Intermediate / Advanced

Camber: Directional Extra Camber

Flex: Medium

Shape

A tapered directional snowboard features a shape where the tail is narrower than the nose, providing enhanced control and stability in deeper snow. This design improves floatation in powder and allows for smoother turns, making it ideal for freeride and backcountry riding. While it excels in one direction, the taper helps the board naturally guide you through challenging conditions.

Camber

A directional shape with a predominantly positive camber profile, complemented by a subtle rocker in the nose.

Topsheet: Topless Topsheet

Topless Construction eliminates the need for a topsheet by transferring graphics directly to the fiberglass. This process enhances durability, reduces weight, and minimises raw material usage.

Laminate: Hybrid Glass, Linear Carbon, Carbon Array 3, Single Impact Plates

Triaxial fiberglass on top and biaxial on the base, providing balanced torsional flex and stiffness for improved response at high speeds.

Two carbon strips beneath the core enhance snap, boosting ollie power.

This power distribution technology ensures complete board control at every stance position. Three carbon stringers, strategically placed in the binding zone, collect input from any stance width and pressure angles. Rider input is efficiently directed to the opposite contact point for optimal board control.

Single layer urethane weaves placed beneath each binding area enhance compressive strength, preventing board breaks where it’s needed most.

Core: Performance Light Core

Sidewall: Slimewalls

Flexible and impact-absorbing, Slimewalls work like skateboard wheels, softening interactions with snow, wood, or metal surfaces. Virtually indestructible, they’re the most durable sidewalls in snowboarding.

Base: Sintered, Stone Ground Base

This base is created by heating and compressing small polyethylene particles, forming a porous structure that absorbs wax efficiently. As a result, the board glides smoothly and quickly on snow. Sintered bases are known for their toughness, durability, and speed. Ride uses a premium 4000 PTEX material for its sintered bases.

Edges: Standard Steel Edge

A strong, standard metal edge material.

Additional Features:

Thin Con - All Ride boards are designed with Thin Construction, featuring tapered tips and tails. This design reduces swing weight, improves tip flex, and boosts overall durability.

Bio Resin - A plant-based epoxy used to bond the layers of snowboards, crafted from renewable resources like vegetable oils instead of petrochemicals. This eco-friendly resin helps create snowboards with a reduced carbon footprint.

The 2026 Ride Moderator is the ultimate all-mountain snowboard, built to tackle any condition with ease. Featuring a medium flex and a Tapered Directional Extra Camber profile, it offers a smooth, responsive ride with impressive pop and excellent flotation in deep powder. The Tapered Linear Quadratic Sidecut ensures effortless turns and exceptional edge hold, while the Slim Wall construction enhances flexibility and shock absorption for a smooth, comfortable ride across the mountain.

Packed with high-performance features like the Performance Light Core, Carbon Array 3, and a Sintered Stone Ground Base, the Moderator is designed for speed and precision. Plus, with eco-friendly bio-resin, this board delivers top-tier performance while reducing environmental impact. Whether you're carving up groomers or floating through fresh powder, the 2026 Ride Moderator is ready to take on whatever the mountain throws your way.

Rider Type: All Mountain / Freeride

Ability: Intermediate / Advanced

Camber: Directional Extra Camber

Flex: Medium

Shape

A tapered directional snowboard features a shape where the tail is narrower than the nose, providing enhanced control and stability in deeper snow. This design improves floatation in powder and allows for smoother turns, making it ideal for freeride and backcountry riding. While it excels in one direction, the taper helps the board naturally guide you through challenging conditions.

Camber

A directional shape with a predominantly positive camber profile, complemented by a subtle rocker in the nose.

Topsheet: Topless Topsheet

Topless Construction eliminates the need for a topsheet by transferring graphics directly to the fiberglass. This process enhances durability, reduces weight, and minimises raw material usage.

Laminate: Hybrid Glass, Linear Carbon, Carbon Array 3, Single Impact Plates

Triaxial fiberglass on top and biaxial on the base, providing balanced torsional flex and stiffness for improved response at high speeds.

Two carbon strips beneath the core enhance snap, boosting ollie power.

This power distribution technology ensures complete board control at every stance position. Three carbon stringers, strategically placed in the binding zone, collect input from any stance width and pressure angles. Rider input is efficiently directed to the opposite contact point for optimal board control.

Single layer urethane weaves placed beneath each binding area enhance compressive strength, preventing board breaks where it’s needed most.

Core: Performance Light Core

Sidewall: Slimewalls

Flexible and impact-absorbing, Slimewalls work like skateboard wheels, softening interactions with snow, wood, or metal surfaces. Virtually indestructible, they’re the most durable sidewalls in snowboarding.

Base: Sintered, Stone Ground Base

This base is created by heating and compressing small polyethylene particles, forming a porous structure that absorbs wax efficiently. As a result, the board glides smoothly and quickly on snow. Sintered bases are known for their toughness, durability, and speed. Ride uses a premium 4000 PTEX material for its sintered bases.

Edges: Standard Steel Edge

A strong, standard metal edge material.

Additional Features:

Thin Con - All Ride boards are designed with Thin Construction, featuring tapered tips and tails. This design reduces swing weight, improves tip flex, and boosts overall durability.

Bio Resin - A plant-based epoxy used to bond the layers of snowboards, crafted from renewable resources like vegetable oils instead of petrochemicals. This eco-friendly resin helps create snowboards with a reduced carbon footprint.

The Magic Stick is designed for all-mountain performance. The tapered directional hybrid shape will ensure float in softer snow, while providing stability on harder snow. The camber between the bindings provides snap and response and the slightly longer nose has more rocker than the narrower tail, which both provide float and control in all conditions. A Tapered Bi-Radial sidecut provides effortless turn initiation and a smooth and stable turn/exit. Slimewalls® provide a smooth ride and increase durability underfoot. Carbon Array 3™ provides extra pop and control without adding stiffness. The Magic Stick is a mid-flexing all-mountain shape for the most demanding women riders.

Rider Type:  All Mountain / Freeride

Shape: Directional

Flex: Medium 

Ability Level: Intermediate / Advanced

Rocker: Rocker Nose / Camber under feet