NZ's Best Selection of Snowboards

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

Quadratic Sidecut – A blend of elliptic curves provides easy turn initiation, superior control on hard pack, and quick edge-to-edge transmission.

CORE

Aspen Strong Core – CNC-selected high-density wood strips for the inserts and rail zones results in improved impact resistance and a predictable flex from opening day to spring slush.

Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

FSC® Certified Wood Core

LAMINATES

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop.

This bio-based resin is made 30% of plant material, offering a high performance resin with a low environmental impact.

SIDEWALLS

ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Royal Rubber – These soft rubber blocks, inserted into Salomon’s ABS Sidewalls in the high pressure zones, smooth out the edge contact like no other construction, whatever the conditions.

BASE

Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.

Medium Stone Finish – A medium structure finish that improves base glide. Quicker in all snow conditions, from cold morning corduroy to spring slush.

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

ADDITIONAL FEATURES

Natural Wax

BINDING COMPATIBILITY

2 x 4 Insert Pattern

SPECS:

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

Quadratic Sidecut – A blend of elliptic curves provides easy turn initiation, superior control on hard pack, and quick edge-to-edge transmission.

CORE

Aspen Strong Core – CNC-selected high-density wood strips for the inserts and rail zones results in improved impact resistance and a predictable flex from opening day to spring slush.

Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

FSC® Certified Wood Core

LAMINATES

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop.

This bio-based resin is made 30% of plant material, offering a high performance resin with a low environmental impact.

SIDEWALLS

ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Royal Rubber – These soft rubber blocks, inserted into Salomon’s ABS Sidewalls in the high pressure zones, smooth out the edge contact like no other construction, whatever the conditions.

BASE

Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.

Medium Stone Finish – A medium structure finish that improves base glide. Quicker in all snow conditions, from cold morning corduroy to spring slush.

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

ADDITIONAL FEATURES

Natural Wax

BINDING COMPATIBILITY

2 x 4 Insert Pattern

SPECS:

response, and rocker on the tip/tail for pressability.

Flex

Flex Rating – 3 (1 Soft - 5 Stiff)

Shape

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

Core

Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

Aspen Wood Core – Full length Aspen wood core with high-density strips of birchwood in the binding area.

FSC® Certified Wood Core

Laminates

Biaxial Low Density Fiberglass – Low-density fibers allow for lighter boards that keep their playful forgiving flex forever.

Sidewalls

ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Base

Extruded EG – A harder compound than EXT, Salomon EXT EG takes the easy maintenance of a non-sintered base and adds Electra for increased gliding characteristics.

Standard Stone Finish

Edges

Bite Free Edge Bevel – Fully detuned tip and tail edges for a hang-up free ride.

Additional Features

Natural Wax

Binding Compatibility

2 x 4 Insert Pattern

SPECS:

Quad Camber – The aggressive characteristics of camber blended with rocker on the tip and tail to make the board playful and agile in pow. Quad Camber built with a blend of different radiuses and is more forgiving than a regular camber but maintains the reactivity and pop.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

CORE

LAMINATES

Tri-Ax Glass is a fiberglass core set at three different angles that increases durability and the overall lifespan of the board.

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop. Adding carbon stringers in the nose and tail to standard Popster allows you to transfer more energy to maximise pop.

SIDEWALLS

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

Quad Camber – The aggressive characteristics of camber blended with rocker on the tip and tail to make the board playful and agile in pow. Quad Camber built with a blend of different radiuses and is more forgiving than a regular camber but maintains the reactivity and pop.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

CORE

Ghost Green Core – Ghost Green Core components have been selected and designed to optimize pop and reduce weight while utilizing sustainable attributes of a super light paulownia wood.

Popster Booster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Booster adds carbon stringers to the standard Popster to radiate all of the energy from under your feet to the tip/tail, maximizing pop.

LAMINATES

Tri-Ax Glass is a fiberglass core set at three different angles that increases durability and the overall lifespan of the board.

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop.

The addition of two Ghost Carbon Beams in the tip and tail offer maximum pop and stability at high speeds.

Damplifier Lite adds lightweight cork and honeycomb placed in the nose for lower weight, better float and better dampening.

This bio-based resin is made 30% of plant material, offering a high performance resin with a low environmental impact.

SIDEWALLS

Sintered EG – Engineered for a super fast glide in everything from fresh pow to sticky spring snow. Sintered material provides superior wax retention, Gallium strengthens impact resistance, and the Electra finish gives a turbocharged glide.

Medium Stone Finish – A medium structure finish that improves base glide. Quicker in all snow conditions, from cold morning corduroy to spring slush.

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

Quad Camber – The aggressive characteristics of camber blended with rocker on the tip and tail to make the board playful and agile in pow. Quad Camber built with a blend of different radiuses and is more forgiving than a regular camber but maintains the reactivity and pop.

SHAPE

A twin-shaped snowboard is symmetrical with an identical tip and tail, designed for equal performance riding forward or switch. It’s perfect for freestyle tricks, spins, and jumps, offering balance, stability, and control in both directions..

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

CORE

BA LD - The use of low-density fibres creates a lighter board that keeps its playful forgiving flex forever.

Popster - Pop meets performance. Popster shapes the woodcore profile with strategically placed variations of thickness, providing skate-influenced snap and pop.

CNC-cut high-density Aspen wood strips in the insert and rail zones improve impact resistance and ensure consistent flex the entire life of the core.

LAMINATES

BA LD low density fiberglass is used to create a lighter and more flexy board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop.

SIDEWALLS

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

Quad Camber – The aggressive characteristics of camber blended with rocker on the tip and tail to make the board playful and agile in pow. Quad Camber built with a blend of different radiuses and is more forgiving than a regular camber but maintains the reactivity and pop.

SHAPE

A twin-shaped snowboard is symmetrical with an identical tip and tail, designed for equal performance riding forward or switch. It’s perfect for freestyle tricks, spins, and jumps, offering balance, stability, and control in both directions..

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

CORE

BA LD - The use of low-density fibres creates a lighter board that keeps its playful forgiving flex forever.

Popster - Pop meets performance. Popster shapes the woodcore profile with strategically placed variations of thickness, providing skate-influenced snap and pop.

CNC-cut high-density Aspen wood strips in the insert and rail zones improve impact resistance and ensure consistent flex the entire life of the core.

LAMINATES

BA LD low density fiberglass is used to create a lighter and more flexy board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop.

SIDEWALLS

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

CORE

LAMINATES

BA MD Fiberglass, Popster Eco Booster, 30% Bio-Based Resin

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop. Adding carbon stringers in the nose and tail to allows you to transfer more energy to maximise pop. With the addition to Bamboo rods you get the best in performance and pop in your board.

This bio-based resin is made 30% of plant material, offering a high performance resin with a low environmental impact.

SIDEWALLS

EDGES

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

CORE

LAMINATES

BA MD Fiberglass, Popster Eco Booster, 30% Bio-Based Resin

BA MD medium density fiberglass is used to create a light and lively board.

Popster mills the core inside of the inserts, allowing the board to flex more naturally and energy is transferred to the nose and tail more efficiently for extra pop. Adding carbon stringers in the nose and tail to allows you to transfer more energy to maximise pop. With the addition to Bamboo rods you get the best in performance and pop in your board.

This bio-based resin is made 30% of plant material, offering a high performance resin with a low environmental impact.

SIDEWALLS

EDGES