Shop NZ's largest selection of ski & snowboard gear.

Designed for stability and quick edge-to-edge control in all conditions. With a directional extra camber profile this board is built for stability and pop while giving just enough rise in the nose to float on those deeper days. The Deep Fake is designed to be ridden in a standard length, no downsize is needed. The tapered linear quadratic sidecut is designed for smooth turn initiation and powerful grip through turns without washing out. Deep Fake features the brand-new Metal Slim Wall construction, a section of titanal metal layered with urethane running the edge of the board, increasing dampening, durability, and responsiveness. This is a premium all-mountain board and features RIDE's performance core, Carbon Array 5, Sintered Stone Ground Race Base, and all-new Bio-resin. Deep Fake is built for riders who take advantage of all snow conditions while staying under the radar.

Rider Type:  All Mountain / Freeride

Shape: Directional

Flex: Medium to Stiff

Ability Level: Intermediate / Advanced / Expert

Rocker: Extra Camber

CAMBER

Directional Extra Camber – A directional shape with a hybrid profile that has more camber than rocker.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

CORE 

PERFORMANCE™ CORE: High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

SIDEWALLS

METAL SLIM WALLS: Metal Slim Wall that utilizes full-length Titanal Aluminum strips laminated into a urethane composite sandwich which provides superior edge hold, more efficient energy transfer, and unbeatable durability.

SIDECUT

Linear Quadric Sidecut - A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

LAMINATES:

SINGLE IMPACT PLATES LAMINATES: Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. 

CARBON ARRAY 5: This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

PRE-CURED GLASS FIBERGLASS: USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.

SPECS:

Half the size but twice the technology of other kids boards on the market

For little tykes that wanna go big, the Zero Jr. is a Twin Hybrid Rocker board that aims to reduce edge catching, make it easier to initiate turns so they can get the hang of the edge-to-edge transition of riding groomers and soften the vibrations that can cause kids to fall. Packed with similar construction as our adult-size Zero model, the Zero Jr. is the perfect way to introduce your little one to riding or let them take it to the next level if they have their feet solidly under them after a few winters on the hill.

Rider Type:  All Mountain  

Shape:  Asymmetrical Twin Hybrid Rocker

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  All Levels - Youth

TWIN HYBRID CAMBER:

A true twin-shape hybrid profile that has more camber than rocker.

LINEAR QUADRATIC SIDECUT:

A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

SINTERED BASE:

High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

PERFORMANCE™ CORE:

High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

SLIM WALLS:

RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit. By creating a fully 3-D composite structure over Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.

CARBON ARRAY LAMINATES:

This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

BIAXIAL GLASS FIBERGLASS:

90° and 0° angles, fun and forgiving.

IMPACT PLATES LAMINATES:

Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

STANDARD TOP SHEET:

Durable Urethane topsheet material with graphics only RIDE can bring you.

CLEAVE EDGE™ STEEL:

Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be detuned to larger radii.

SPECS:

An absolute weapon for big mountain riders who demand only the best in the steep, deep and fast freeriding conditions. This one is just for the expert freerider. An all-conditions freeride board that is unbelievably responsive and stable for high-speed freeriding and freeride competitions

Rider Type:  All Mountain / Freestyle / Freeride

Rider Ability: Advanced / Expert

Shape:  Directional 

Flex:  Stiff

CAMBER

Directional Rocker - A hybrid rocker/camber flex pattern defined by more tip rocker than tail rocker and camber between the bindings. The rockered tips floats the board’s nose and improves maneuverability while the camber underfoot 

SHAPE

Directional Shape

3D Contour Base 3.0 - Freeride-focused 3D Contour Base featuring 7mm of spoon bevel in the nose and 0 to 7mm of spoon bevel in the tail. The spoon bevel starts at the rocker point.

The center of the board is perfectly flat with no spoon bevel on the edges between the contact
points. The flat base allows instantaneous edge engagement between the feet when you lean into a turn.

The spoon bevel starts at the contact point. The bevel increases very gradually so there is not an abrupt transition between the flat center of the board and the raised tip and tail edges

The spoon bevel is most defined at the tip and tail of the board. The rounded edges at the tips reduce edge catch and drag.

12.5mm Taper

CORE

Fusion Carbon - The Fusion Core is Jones's lightest wood core yet. The core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Power Plates - New wood core design featuring specially positioned dual-layer plates on both sides of the insert packs that help transfer energy, enhance board response and increase edge impact durability

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence.

Carbon / Innegra Reinforcement - Carbon Innegra fiber forms an ultra-tough hybrid composite layer that dampens the board torsionally and from tip to tail. Made in the USA.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter

Float Pack Inserts - Allows super setback stance for deep pow days.

TOPSHEET

Ash Venneer Wood  - Thin ash wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the topsheet provide even flex and suck up chatter from uneven snow conditions.

BASE

Ultra Base - Jones exclusive base material that sets new performance standards. Lab results and snow testing
show 25% better wax absorption, better glide in warm/ wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

OTHER TECH

Forever Flex is a manufacturing process that helps stabilize the flex and rocker profile of a board for
it’s lifetime. Our boards now finish the first stages of production slightly overbuilt and then we “break them in” using specialized machinery that mimics extreme riding use. By flexing the fresh board fibers and epoxy at the factory the materials settle in to their final arrangement within the board layup much the same as if you rode the board for 20 days. This process helps us narrow our production tolerances so the board you buy has a more accurate specified flex and rocker profile that will change less as you ride it more.

STATS

                   158   161   162W   164   165W

Waist           24.9   25.2   26.3    25.4     26.6
Sidecut         8.5     9.1      9.3     9.3      9.4

A classic pill freestyle shape from his beautiful mind. The C3 cambered Head Space is Forest’s twin freestyle mind expansion tool. A proven street slayer, rips any freestyle situation you might encounter at your home resort or out there with the crew. Magne-Traction® edge control, FSC certified eco core, sintered eco sublimated base. Find your feet with a board that knows anything and everything is possible.

RIDER TYPE: Freestyle / Park

Shape: Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders.

CORE

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

LAMINATES

Triaxial / Biaxial Fiberglass – Strong and poppy.

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sublimated Sintered Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS:

Bear witness to the technically supreme, supercharged,  SUPER D.O.A. This game-changing super-snowboard has embraced the shaping and camber theory from one of the most successful and widely loved snowboards ever and amplified the construction for some serious fun. Designed for the intermediate and above all-terrain resort rider seeking the award-winning geometry of the D.O.A. series in a lighter, more energetic, and responsive chassis, the SUPER D.O.A. can help you go faster, edge quicker, and push yourself into new and exciting terrain.

Rider Type: All Mountian / Freestyle

Shape: True Twin

Flex: 6/10 - Medium

Rocker: Rocker / Camber / Rocker

Ability Level: Advanced / Expert

SPECS:

Designed as a “tween-age” destroyer, these boards form a bridge between the boys and the men. It’s here where the kids start riding better than their parents if that hasn’t happened already.

Inspired by the award-winning D.O.A. series, the Children of the Gnar features a next-generation hybrid camber design that delivers the pop and response of a camber board with the predictability of reverse camber. Although this series is very forgiving and promotes skill-building, it is no toy. The Children of the Gnar features premium quality components like the Select 2.0 Core™, making it the go-anywhere, do-anything freestyle deck for young shredders during those in-between years.

Rider Type: All Mountain / Freestyle

Shape: True Twin

Flex: Soft

Ability Level: Intermediate / Advanced 

CAMBER

Resort V1 Profile – RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

XXX[Truded]™ Base – If there’s one thing we know about kids and groms, it’s that they can be hard on their gear and they’re never going to wax their snowboard. The XXX[TRUDED] base material is a high density extruded base material that is durable and low maintenance. The relative surface strength equals a base that will last longer and be more durable when jibbing and ripping around the mountain.

SPECS: