BaseNZ Outlet NZ

Camber - An advocate of powerful turns and poppy precision, camber speaks to the core values of board design. Offering a snappy suspension, the camber distributes weight evenly over the entire length of the board for smooth, continuous edge control from tip to tail.

FLEX

Twin Flex - The flex is perfectly symmetrical from tip to tail for a balanced ride that's equally versatile regular or switch.

Personality - Medium / Aggressive

SHAPE

Twin - Perfectly symmetrical for a balanced ride that's equally versatile regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability no matter which way you point it.

Pro-Tip - A tapered tip and tail thickness reduce swing weight for easier mobility.

CORE

FSC Certified Super Fly II 700G Core - Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone EGD - The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

Squeezebox - Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.

LAMINATES

45 ° Carbon Highlights - Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine-tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45 ° fiber angle provides a more aggressive ride.

BASE

Sintered WFO - Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

EDGES

Frostbite Edges - Frostbite extends out slightly beneath your bindings for tremendous edge-hold on hard, icy conditions. Powerful when you need them, and playful when you don't, Frostbite Edges are hungry for hard-pack while remaining smooth, flowing, and forgiving.

ADDITIONAL FEATURES

Super Sap ® Epoxy - A resin formulated with bio-based materials that reduce the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

The Channel ® Mounting System - Stronger, faster, easier, and more adjustable - The Channel gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Channel Inserts Included - Channel Inserts are required to mount your bindings. Inspect packaging before disposing of.

SPECS:

Resort V1 Profile. RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next-generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

TRUE TWIN SHAPE

Constructed the same from nose to tail, this board will ride switch and regular equally well for controlled jumps, landings, turns, and spins.

SIDECUT

Blended Radial Sidecut. BLENDED RADIAL sidecuts feature a single radius arc through the midsection of the board combined with a custom-designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board it's performance.

3D Thermopolymer Supercore - This extremely lightweight, super-combo core of premium Poplar, Paulownia, and Beech with recycled thermopolymer (PET) inlaid channels offer maximum durability, energy and pop. This is one of the most advanced cores Capita makes and it is the perfect composition for the top-end Super DOA.

Super Carbon - 2 x 50mm super wide carbon strips are laid along the length of the board into the tip and tail. This extra wide carbon adds twice the power and response of alternative carbon additives.

HolySheet Tri/Tri Fibreglass + Magic Bean Resin - Triax/Triax HolySheet glass has a higher glass to weight ratio than normal fibreglass, giving you more stiffness with lower weight than a traditional layup. This is impregnated with a high performance, environmentally responsible, plant based resin that provides a powerful and dynamic ride that's better for the planet.

Fortress Aramid Bound Sidewalls - Sidewalls are bonded by a Kevlar S wrap from the top of the sidewall to the underside of the core. This lightweight technology binds the sidewall to the core like no other.

Hyperdrive Adv XT Die Cut Base - This custom formulated base uses exceptional anti-friction properties due to high molecular mass and specialised processing aids to make a sintered material that is beyond fast and is one of the fastest, meanest and best bases available.

TOPSHEET

Megalite Skin Topsheet - Super thin and mega durable matte lamina topsheet that offers 60% weight reduction over regular Capita top sheets.

Moonshot Omni-Tune - Capita has taken it a step further and given this base a stone grind structure which helps it glide over snow with minimal resistance and is optimized for regular and switch riding.

Full ABS1000 Sidewalls

Tapered Directional Rocker – A directional shape built with true rocker throughout the tip and tail.

FLEX

Medium Response

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut that allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on a flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strength and light.

LAMINATES

Carbon Array 3™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most

SIDEWALLS

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder, and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

SPECS:

Directional Rocker – A directional shape built with true rocker throughout the tip and tail.

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut that allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

WMNS Performance™ Core – Specially formulated for the women’s line, this core combines lightweight Paulownia wood stringers with high strength Aspen. Available on every women’s board.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Slimewalls® – RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

Carbon Slimewalls® – This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This exclusive tech enhances the charging rider’s experience as we have moved the carbon pop construction to the outside edge for better stability and enhanced response.

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

TOPSHEET

Topless™ Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

S1 Core – Created to be more damp underfoot and incredibly strong, the S1 core is constructed from Bamboo, Aspen, and Paulownia. Tip to tail Bamboo add snap, durability, and damping underfoot is balanced by lightweight Paulownia in the middle, tip and tail of the board. Aspen and Bamboo are placed at 30 degree angles to increase strength and add response underfoot.

LAMINATES

Carbon Power Fork™ – Equal parts snap and energy transfer, the ultra-lightweight Carbon Power Fork™ additives are dynamically flexing to optimize the performance in a snowboard. Carbon Power Fork™ additives are strategically shaped to offer greater response and energy return by increasing the width toward the tail – allowing for more material to be engaged, and more energy to be created the harder the tail is flexed.

ICG 10 Biaxial Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

BASE

Wax Infused Sintered 4001 Base – Hard, Fast, and Durable. Wax-Infused for a Better and Longer Lasting Glide.

TOPSHEET

SnowPhobic Topsheet – Helps eliminate snow buildup when it gets deep

BINDING COMPATIBILITY

2 x 4 Inserts

Directional Rocker – A directional shape built with true rocker throughout the tip and tail.

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut that allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

WMNS Performance™ Core – Specially formulated for the women’s line, this core combines lightweight Paulownia wood stringers with high strength Aspen. Available on every women’s board.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Slimewalls® – RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

Carbon Slimewalls® – This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This exclusive tech enhances the charging rider’s experience as we have moved the carbon pop construction to the outside edge for better stability and enhanced response.

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

TOPSHEET

Topless™ Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.