Sale Ski and Snowboard Gear

Tapered Directional Rocker – A directional shape built with true rocker throughout the tip and tail.

FLEX

Medium Response

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut that allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on a flat base.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strength and light.

LAMINATES

Carbon Array 3™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most

SIDEWALLS

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder, and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

SPECS:

Resort V1 Profile. RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next-generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

TRUE TWIN SHAPE

Constructed the same from nose to tail, this board will ride switch and regular equally well for controlled jumps, landings, turns, and spins.

SIDECUT

Blended Radial Sidecut. BLENDED RADIAL sidecuts feature a single radius arc through the midsection of the board combined with a custom-designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board it's performance.

3D Thermopolymer Supercore - This extremely lightweight, super-combo core of premium Poplar, Paulownia, and Beech with recycled thermopolymer (PET) inlaid channels offer maximum durability, energy and pop. This is one of the most advanced cores Capita makes and it is the perfect composition for the top-end Super DOA.

Super Carbon - 2 x 50mm super wide carbon strips are laid along the length of the board into the tip and tail. This extra wide carbon adds twice the power and response of alternative carbon additives.

HolySheet Tri/Tri Fibreglass + Magic Bean Resin - Triax/Triax HolySheet glass has a higher glass to weight ratio than normal fibreglass, giving you more stiffness with lower weight than a traditional layup. This is impregnated with a high performance, environmentally responsible, plant based resin that provides a powerful and dynamic ride that's better for the planet.

Fortress Aramid Bound Sidewalls - Sidewalls are bonded by a Kevlar S wrap from the top of the sidewall to the underside of the core. This lightweight technology binds the sidewall to the core like no other.

Hyperdrive Adv XT Die Cut Base - This custom formulated base uses exceptional anti-friction properties due to high molecular mass and specialised processing aids to make a sintered material that is beyond fast and is one of the fastest, meanest and best bases available.

TOPSHEET

Megalite Skin Topsheet - Super thin and mega durable matte lamina topsheet that offers 60% weight reduction over regular Capita top sheets.

Moonshot Omni-Tune - Capita has taken it a step further and given this base a stone grind structure which helps it glide over snow with minimal resistance and is optimized for regular and switch riding.

Full ABS1000 Sidewalls

TRUE TWIN SHAPE

Constructed the same from nose to tail, this board will ride switch and regular equally well for controlled jumps, landings, turns, and spins.

SIDECUT

Blended Radial Sidecuts feature a single radius arc through the midsection of the board combined with a custom designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board’s performance.

The P2 Superlight Core features internal Poplar strips fused with a more dense and powerful lightweight Paulownia wood through the insert area and along the rails. This is an extremely lightweight and versatile core and is combined with high impact resistance and maximum pop.

2 x 30mm Carbon Fibre Boosters - Carbon Fibre is laid parallel to the edge along the length of the board for more pop and power with minimal added weight.

Hybrid Holysheet Bi/Bi with Carbon & Magic Bean Resin - Custom weighted Biaxial top and bottom fiberglass increases strength and durability, which is impregnated with high performance, environmentally responsible, plant based resin.

Fortress Kevlar Bound Sidewalls - Flyweight Kevlar is laid up above the sidewalls for extra control and power in your turns.

Quantum Drive™ Base – The QUANTUM DRIVE™ running base is formulated with a progressive blend of compressed ultra-high-molecular-weight polyethylene. As an evolution from the already blazing fast ULTRADRIVE™, this running base features higher density for durability and absorbs more wax to wick longer and ride faster. Properly maintained sintered bases are fast and durable, and the preferred choice of many high-end enthusiasts worldwide.

360 Degree HRC48 Steel Edges

TRUE TWIN SHAPE

Constructed the same from nose to tail, this board will ride switch and regular equally well for controlled jumps, landings, turns, and spins.

SIDECUT

Blended Radial Sidecuts feature a single radius arc through the midsection of the board combined with a custom designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board’s performance.

The P2 Superlight Core features internal Poplar strips fused with a more dense and powerful lightweight Paulownia wood through the insert area and along the rails. This is an extremely lightweight and versatile core and is combined with high impact resistance and maximum pop.

2 x 30mm Carbon Fibre Boosters - Carbon Fibre is laid parallel to the edge along the length of the board for more pop and power with minimal added weight.

Hybrid Holysheet Bi/Bi with Carbon & Magic Bean Resin - Custom weighted Biaxial top and bottom fiberglass increases strength and durability, which is impregnated with high performance, environmentally responsible, plant based resin.

Fortress Kevlar Bound Sidewalls - Flyweight Kevlar is laid up above the sidewalls for extra control and power in your turns.

Quantum Drive™ Base – The QUANTUM DRIVE™ running base is formulated with a progressive blend of compressed ultra-high-molecular-weight polyethylene. As an evolution from the already blazing fast ULTRADRIVE™, this running base features higher density for durability and absorbs more wax to wick longer and ride faster. Properly maintained sintered bases are fast and durable, and the preferred choice of many high-end enthusiasts worldwide.

360 Degree HRC48 Steel Edges

Directional Twin Standard Camber – A directional twin shape with a hybrid standard traditional camber underfoot.

Slightly longer in the nose.

Medium Response

Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Pre-Cured Glass Fiberglass – USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.

Slimewalls® – RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

Carbon Slimewalls® – This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This exclusive tech enhances the charging rider’s experience as we have moved the carbon pop construction to the outside edge for better stability and enhanced response.

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

2 x 4 Inserts

New for 2025 model - Super lightweight Poplar Wood Core

LAMINATES

Comp Series Base – Sintered UHMW polyethylene with added carbon aids in speed and durability

EDGES

2.5 Impact Edge – Oversized and specially heat treated, this edge is built to resist impact damage in the most demanding situations

MidBite blends the response of a narrow waist width with the stability of wider nose and tail.

The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to- edge response. Meanwhile, from your binding out to the end of the sidecut we maintain a board width that is a stable platform for popping, spinning, and landing.

CORE

Full Poplar Core - YES snowboards baseline core for tip to tail wood-core snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.

BASE

Sintered True Base - Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

Regular or goofy - it’s still a true twin. Just flip it around.

Sintered True - Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

SPECS:

Directional Rocker – A directional shape built with true rocker throughout the tip and tail.

SHAPE

Tapered Bi-Radial Sidecut – A twin sidecut that allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

CORE

WMNS Performance™ Core – Specially formulated for the women’s line, this core combines lightweight Paulownia wood stringers with high strength Aspen. Available on every women’s board.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Carbon Infused Glass – 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

SIDEWALLS

Slimewalls® – RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

Carbon Slimewalls® – This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This exclusive tech enhances the charging rider’s experience as we have moved the carbon pop construction to the outside edge for better stability and enhanced response.

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

TOPSHEET

Topless™ Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.